SKORSTEN CLASSIC is a chimney system discharging exhaust gases from devices powered with solid fuels. It is used in buildings with a “traditional fireplace”, which is to generate heat in the room it’s situated. “Traditional fireplaces” don’t have water jacket spreading heat in the building. They are powered with seasoned wood logs with a moisture content less than 20%.
SKORSTEN CLASSIC is a chimney system for dry fuels. The chimneys are used everywhere where exhaust gases temperature at the entry is equal or higher than 200˚C *. It allows to resign from thermal insulation inside the system. **
*LOOK OUT: Only coal and wood burn in such way. Solid fuels like eco-bean coal, pellets and briquettes produce temperature below 200°C. SKORSTEN CLASSIC is not recommended to work with these types of fuels.
**LOOK OUT: For fire places with a water jacket an appropriate chimney system is required. SKORSTEN PLUS meets the requirements.
The highest quality of all parts guarantees durability and safety of SKORSTEN CLASSIC.
AVAILABLE DIAMETERS
Ø 160 Ø 180 Ø 200 Ø 250
Ø 300* Ø 350* Ø 400*
The most popular in Poland is Ø 200 mm.
* Custom range (for special order after delivery date is fixed).
SYSTEM PARTS
Skorsten Classic
Basic Set includes: hollow bricks, straight pipes, connecting tee 90°, cleanout tee, small lower profile, centring bands and INSTALLATION PACKAGE
Basic Set | ||
Hollow brick |
Straight pipe |
Connecting tee 90° |
Connecting tee |
Small lower profile |
Centring bands |
INSTALLATION PACKAGE (INCLUDED)
Installation Package | ||
Cleanout doors |
Face plate |
Flue cover |
Lost shuttering |
Ventilation grid |
Reinforcement covers |
Expansion plugs |
Dry acid resistant putty |
Installation instructions |
MAX PACKAGE (ADDITIONALLY PAID)
You can also order MAX PACKAGE for 60 PLN + VAT. The package includes: face plate handles, installation schemes, blade saw, installation sponge, high temperature silicone, condensate drain trap.
MAX Package | ||
Face plate handles | Scheme |
Installation scheme |
Blade saw |
Installation sponge |
Condensate drain trap |
High temperature silicone |
SAMPLE COMBINATIONS OF CHIMNEY SYSTEM
Scheme | Description | Cross-section Measurements | ||||
Single-draught chimney– PK | 36 x 36 cm | |||||
Single-draught chimney with two ventilation channels – PK+PW2 | 36 x 60 cm | |||||
Single-draught chimney with four ventilation channels – PK+2PW2 | 36 x 84 cm | |||||
Single-draught chimney with a ventilation channel – PKW | 36 x 50 cm | |||||
Single-draught chimney with three ventilation channels option I – PKW + PW2 | 36 x 74 cm | |||||
Single-draught chimeny with three ventilation channels option II – PKW + 2PW1 | 50 x 56 cm | |||||
Single-draught chimeny with five ventilation channels – PKW + 2PW2 | 50 x 72 cm | |||||
Single-draught chimney with seven ventilation channels – PKW + 2PW3 | 50 x 88 cm |
CONSTRUCTION
SKORSTEN CLASSIC is a simple system consisting of:
|
hollow bricks | |
|
fireclay pipes and tees stabilized with centring bands |
features of SKORSTEN CLASSIC elements:
|
Modular construction – single segment 33 cm high | |
|
Compatibility with ventilation systems allowing to connect gas and ventilation flues next to each other | |
|
Possibility to use 45° connector (suggested to discharge exhaust gases from fire places) | |
|
One type of hollow brick for most diameters of gas flues. | |
|
Cutters on external surface of bricks for easy holes (cleanout and connection). |
To elevate chimney above the roof special tunnels for reinforcement are made in the corners of the hallow bricks.
SKORSTEN CLASSIC chimney system cross section:
SKORSTEN CLASSIC SAFETY GUARANTEE:
|
Centring bands provide verticality of ceramic flue | |
|
Gas-tight ceramic pipes of increased density A1N1 guarantee resistance to high temperature and temperature changes in the system. | |
|
Built-in air system protects from damages caused by moist and improves gas discharge. | |
|
Compliance with the PN-EN 13063 -1 + A1 2009 – system meets requirements for soot fire resistant. |